uwsATV Tool Box , Black

I have removed the rear seat of my jeep wrangler and installed this box behind the front seats. It fits neatly, with just an inch or so to spare between the wheel wells. I voided my warranty by drilling way more than two holes in the floor of the box, in order to insert bolts that tie down my floor jack, and five or six socket rails. I also installed various clips on the iinterior sides of the box to support ratchets and pry-bar. I also installed clips on the outside rear of the box to which I attach my jacking bar, a long breaker bar, and my e-tool (compact shovel/pick). I also installed a removable interior plywood partition (serving also as a jack bottom board) which separates tools from chain storage. I am now in the process of sewing a color-coordinated cover for the toolbox, since the glittering diamondplate finish might attract undue attention of "passerbys" lol. The dimensions given appear to be accurate dimensions of the box per se, but the lid is somewhat larger because it sits like a "hinged cap" on top of the box, and so extends slightly beyond the box. Each handle projects slightly beyond the lid profile by an additional 1/4 inch. I havent actually done the toolbox cover yet, but my notes indicate that the dimensions of my box measured by the widest points of the lid are 32 13/16 inches wide, 12 13/16 high from bottom of box to top surface of lid, and 12 13/16 deep, measured from the front of the lid to the rear of the lid. Again, these are the raw dimensions of the "lid footprint", and for the cloth cover I must still add slack room for seams and fitting, as well as the projection of my e-tool beyond the lid footprint. And if I dont drill out the rivets and remove the handles, then I will also have to add (to the long dimension) an additional 1/4 inch for each handle.Its a great box as shipped (and as subsequently modified by me lol). In spite of all the crap I have inside, the box travels in absolute silence down the trail. Not a rattle or a squeak to be heard.

This does measure 33 x 13 x 13, that is the outside measurements of the box..If you are going to install the tool box against the back of a vehicle, you will need to allow 2 inch space behind the box so that the box cover will have the room to swing open. The quality is good. I also had to buy some heavy duty hasps to be able to fasten the box to the back side of truck bed which cost me $12.50 each.......ouch. Oh and if this is going to be in the cold of winter, cut up the heavy cardboard that the box comes with and put it inside the metal box, it will help stop condensation from forming on any metal you put into the box when it gets cold than warm in the sun.

UWS - say no more!

Decent box. Not high security at all but it will keep out people without tools. The dimensions online are off by an inch in some cases. The opening is a little over 10 deep for the length of the box(not counting the space lost for the strut to hold up. The lid). It is about 12 inches deep and about 31 inches long. The pictures on line dont show a uws logo but mine came with one that is ridiculously oversized for that box.

I looked at similar boxes in stores and they were much more expensive. I had to return the first box since the lock did not work. The cam on the lock had too much of a space which allowed the door to open. Kudos to Amazon for a fairly hassle free return and quick shipment of box# 2. The second box was sticky in that the cover is not aligned. In addition the lock is not solid. I had to bend a piece on the lock to get it to work, but I needed a box for my truck bed ASAP, so I decided to keep it despite it's imperfections. Decent box for the price but not blown away.

Installed this box on my Travel trailer's tongue to store the batteries in because the box can be locked! The metal is a little thin in gage, but will work for my purposes. It is nicely built - all welded construction and polished very brightly.

A bit thin, as you might expect for the price, but looks great and has held up well so far,. I use it to store chains and binders on my trailer, so I'm pretty rough with it, and so far it has held up great.

I purchased this tool box to mount on my UTV Trailer Tongue. I just recieved it today and I'm very very pleased. IT is a very good looking box and appears to be all and maybe more than is described in its write-up details. It will mount very well on the tongue and I'll have much more room in it than I need... The lock and opener are great too, So If you need a box of this size, you won't find a better one, especially at this price... and the free shipping was wonderful Thank you ... Di