FocusriteScarlett 2i2 4th Gen USB Audio Interface for Recording, Songwriting, Streaming and Podcasting — High-Fidelity, Studio Quality Recording, and All the Software You Need to Record

Scarlett 2i2 4th Gen USB - I love it. I am using a long line of multiple 2i2 devices from Gen 1, Gen 2, Gen 3 for years. I am happy with all of them. Very good built quality, plain, low noise, low distortion. They all meet manufacturer specifications. No inflated claims like some manufacturers do. Each model had some tiny glitches that did not affect my experience. So my expectations are high on 4th Gen. A box arrived quickly. I opened it and realized a box has no protecting layer to soften shocks, blows during transportation. Just over box inside of almost identical, only slightly larger box! This experience was not a good welcome to me. I believe such packaging of any electronics reduces product reliability. Didn't you see how sometimes drivers drop packages on concrete floor? So I almost feel like getting used product, am I too sensitive about it? Alone in my opinion such product should have some shock absorbing layer of foam material or air bubbles sheet?After opening a box I see a piece of paper printed with miniature characters. Microscope could help... But no guidance here how to get the first steps. Only warnings in very many languages. As I would need all this, very high priority to manufacturer but not to me! I think this excellent product has new functions that a purchaser is not familiar with. It would be highly beneficial if a a small hard card size like 2-3 business cards shows briefly what happens when each of new controls used. OK, I can find it in pdf user manual, but I don't want to print user manual for one of 15 models audio interfaces I have. So I will work with audio recordings while scrolling through pdf file, at least till I am familiar with all this product offers. After such observations I wish to get to recording... And pdf file does not tell clearly up front that utility program is actually a driver. I have to spend time to learn it. This is the very first item to perform after purchase, but info is written among other content, not up front. I want to install utility program but no info provided if 2i2 Gen 4 should be connected or not, during installation. I learn here I should go to the internet, manufacturer' webpage and get information how to proceed. A suggestion is strong - identify yourself first! So you can get audio recording software. But I don't use the internet on sacred computers. I don't wish to be exposed to Spyware and threats from Microsoft like this one: You paid for our Office Suite, but we make it stop at our convenience under pretense we check if you are the correct user???? So I will to install a driver only, no suspicious activities and forced "updates", no spyware on my precious computer. How do I proceed considering above? I loaded needed file on another computer, copied it to one working with 2i2 Gen 4. It works fine that way. The utility is just sampling rate changing program combined with a driver, at least on my computer. Nothing else. A device works well, nothing wrong. I enjoy it from that moment. I don't need extra programs for musicians.Now most enjoyable part - distortion and noise testing. Both are excellent low, exactly as shown on specifications. I really enjoy low noise that is closer now to that of higher grade Clarett+ noise. Regarding distortion, Clarett+ has specs about 0.0003% while Scarlett 2i2 spec is around 0.001% for all generations 1, 2, 3, 4. Truly excellent product here, amazing performance for $200 and this product is far ahead of other USB audio interfaces I used before. Important to me is the fact it can work with no AC/DC power adapter. Through my career I experienced scenarios that noise reading was lowest if USB audio device was powered through USB cable. Then noise reading was even slightly better if power supply disconnected from laptop. The noise reading was consistently worse if given USB audio interface AND laptop used both AC/DC adapters. The difference could be a few dB but sometimes noise spikes were 10dB and more above noise floor, depending how clean was power line, individual wall outlets. I will check later 2i2 Gen 4 on that noise immunity and will update my review.In terms of reliability, all earlier Scarlett 2i2 I used full time worked a minimum of 5 years. If something wrong happened, it would be in the "abuse" category like frequent plugging, unplugging in, out cables with ESD damage maybe. Or connecting to multiple other devices powered with AC/DC adapters and no isolating transformers between. I am a laboratory user, not a musician, so different considerations, scenarios. Scarlett 2i2 Gen 4 is a great tool now for my audio experiments, audio test fixtures, audio signal measuring / analyzing setups.5 stars, but no 5+ due to less perfect packaging with less perfect protection against abuse in transit.

This is my third Scarlett Focusrite 2i2 (it's a long story), but I prefer this brand, because with A/D D/A conversions, you really do get what you pay for. It works with my Dell Inspiron running Reaper DAW, has two ultra quiet preamps (XLR on back), and a HOT monitor output. I won't use any other brand of audio interface for my home practice studio!

I had bought a first-gen 2i2 some years ago, and it worked wonderfully for what I was doing at the time. However, my needs have changed and jumping to the 4th Gen hardware was exactly what I needed. Just about everything can be done on the unit itself but I highly recommend using the Focusrite Control software as it makes things easier.The XLR inputs are on the back, which is nice because it sits on the desk better. However, the line inputs are on the front. I think it would have been better to combine both inputs, as they did with the first-gen, and put them on the back.After registering your device you have access to a decent suite of additional software, trials and discounts. The casing is metal, and it feels well-built. The buttons and knobs feel durable and the jacks feel steady and solid. Focusrite earned my trust, as my old one is still working great and has never had a problem in the years I'd been using it.As far as value, it's built to last so you won't need to upgrade or replace unless your needs change. The inclusion of additional software also helps here.

70db of gain. Much better than the 3rd gen for the PodMic I'm using; although I still added a CloudLifter so I wouldn't have to crank the gain all the way up on this audio interface.My two criticisms are:1. On two occasions I've had to wiggle or unplug/replug the usb-c cable to fix garbled audio.2. Direct monitoring lowers the volume of whatever you're listening to by about 10-15%.

Muy buena placa de sonido.

I did extensive research on audio interface options, and this one was the best value and performance. It also came with a wide range of downloadable audio engineering software products. After only testing the interface and using it for one session, I know for sure now that I picked the best!*If you need (4) lines in, and (4) out...get the Scarlett 4i4.

I love mine so much. It definitely helps create the best quality recording for vocals. It’s a little pricey but it’s definitely worth the investment.

My order arrived quickly and was packed well for the shipping to Hawaii. Took some tweaking but I think I finally got it up and running as it should. Had some connectivity challenges early on but I ordered new cables and wires and started fresh and so far it seems to be working as it should.