FF Finer Form 5-in-1 Weight Bench, Adjustable & Foldable for Bench Press, Strength Training and Full Body Workout, Perfect for Dumbbell Sets or an Adjustable Dumbbell Set in Your Home Gym

This weight bench was easy to put together, and arrived in a timely manner. It is high quality and good for the price. I would recommend.

Fantastic. Folds up nicely and it perfect for my home. Sturdy and comfortable.

IMPORTANT NOTE:If the bench is not flat, it's because you didn't open the bench correctly.If you can't line up the "middle pin" safety pin holes. The pin that makes the bench not fold. You can't line it up because you didn't open the bench correctly.I had that problem. The bench isn't defective, it's just confusing to open it correctly. Try messing with it some more, try folding it up a little and then open it again. And see if you can line up the holes. Once you get it. Stick the pin in. And you're ready to go.PROS:- It's compact.- It folds. (the best part about this bench)- It's very light weight.- It looks nice.- The padding is decently comfortable. It's got tiny bit of cushion. More than enough.- Once you got all the pins in. It seems fine.- I did a basic test so far. It holds a decent amount of weight with out an issue. I will keep testing it.- I put the bench into a vertical position for storage. It's standing on the head piece and the base (Basically an X shape) So it's eating up vertical space. That takes up a little less than 3 feet of space in that position. Which means i don't have to close and reopen it every time. I can just leave it that way off to the side of the room.- I talked to the seller after i thought the bench was defective. Due to the safety pin holes not lining up. Plus few other issues i found. The seller is quick to respond back to me hours later and they are very nice. Clear communication. So i think you can take the risk to buy their equipment and know they will respond back if you have issues.Cons:- Instructions are simple and basic but not complete. A video demonstration would be better because the safety pin. The pin that keeps the bench from folding is very important. That pin is the hardest to figure out. The holes will not align properly unless you open the bench correctly. So i got stuck there. I couldn't figure out how to align the holes. I accidentally figured it out.DO NOT USE THE BENCH UNLESS YOU HAVE THE SAFETY PIN (MIDDLE PIN) IN.- I paid $169.98 + $15.09 tax = $185.07 Total.I think it cost me more because i bought it during the pandemic. I think the bench is worth around $120-$130 maybe at most. The real cost of this bench is the folding ability. That's what you're really paying for.- The Bench looks quick to put together but it's not. The pins and holes are a tight fit. So you gotta push it a little hard and make sure the the holes are lined up. Maybe with more practice it will be quicker. If you plan to take it apart and put it back together everyday. It still will be a bit of a pain. But i still appreciate the ability to fold it.- Adjusting the back piece (turning knob) is a slow process. You have to turn it a lot to get it all the way in. So you need to TURN a lot of times to get it 100% in there. Something to think about.- Pieces of metal fall off the bench when adjusting the back piece. I think two pieces of metal are rubbing against each other because i started noticing little pieces of metal or paint on my wood floor.- The bench i received came with a permanent dirty black mark on the base.- Noisy seat when moving it up and down. Might need some WD-40 oil. Hopefully that fixes it.- When the bench is flat, there's a BIG gap between the back piece and the seat. So when you lay down on it, your butt may end up being on top of the empty gap. Not comfortable but not impossible to overcome. Maybe putting a rolled up towel or yoga block or something similar into the gap will fix it.In Conclusion:If you can get it at a good price. And it comes to you in perfect condition. It's actually a pretty good bench. I would recommend it for a small space room. Small apartment.I'm around 5'11'' and slim (male). The bench size is fine for me. And even better for a woman.The empty gap on the bench is an issue. If i put my head on the head piece, my butt will be on the empty gap. One way i found i can avoid that issue is to lay my head lower on the bench. To avoid the gap.______________WARNING:Maximum weight this bench supports is 660lbs (according to the seller)Your weight + dumbbell(s) total weight = total weight you will use+ (factor in future weight gain and maximum weight you think you will lift in the future)(don't come close to 660lbs and you'll be fine)

It's a great workout bench it folds up small. I really like it. It is made with quality materials.

Great price point, stows nicely. However, the leg was mounted a little crooked and the backrest wobbles slightly. The floor support is solid though and doesn't allow for movement. I have doubts about the 1000lb weight limit with the gauge of steel used but I doubt I'll be using it anywhere near that limit. Overall, It should suffice for a basic home use item with dumbbells.The listing shows two different variations of back support adjustments and it seems the reviews reflect both as well. I received the pin and groove style as opposed to the sliding sleeve. The latter would likely offer better stability than the one I received.

I decided to write a review because I've seen a lot of people that simply aren't using common sense with this product.I've used this bench for incline bench press, flat press, thrust, step ups, crunches, OHP, pullovers, etc. I am a fitness trainer and workout 4x a week. I've bench press with 60# dumbells, 150# barbells and I weigh 235# using this bench.This is a solid bench. There are 2 very important things that must be done to assure your safety.1. Use ALL the pins needed for the fold hinge and the seat. The fold hinge pin is critical to assure the bench doesn't fold on you.2. Screw the back board spring pin COMPLETELY into place. Its a screw mechanism and if your only half screwing it you put yourself at danger with the hinge slipping loose.This bench will work great if you use common sense. The pins are needed for a reason. The screw has to be firmly screwed in for a reason.Very solid for the price and folds up nicely for storage. Folding is easy when you get used to it. Remove all the pins and keep the spring load pin pulled, hold up and pull seat down. Will fold in less than 10 seconds.Come straight out the box with no assembly required and instructions on which pins is for which hole.

You get what you pay for, upon initial assembly (only 3 bolts and the two pins that keep it from folding) it works fine.It is relatively lightweight but doesn't seem to be poorly made, just cheaply.The bench does not sit level on the ground and does have a pretty healthy wobble when there is no weight on it, this does partially go away when you sit on it but not entirely. It is not enough to make the bench feel like it is going to tip over or is unusably unstable.I will update this review if anything ends up being unsatisfactory in the future, but for the most part upon initial use my impression is that this is basically "meh" or "average". Solidly middle of the road product, worth what you pay.

Simply put - poor construction. The front foot comes detached (I still don't understand why) and requires screwing 3 bolts. Simple enough. Only none of the bolt holes lined up (see 1st two photos). I contacted them. They sent a new foot quickly (that's the only reason they got 1 star). This time the front holes lined up but the side holes were even more misaligned. Now I have to pack this up and return it.