🚀 Light Up Your Journey with Style!
The CoCsmart 2PC Flexible Switchback Dual-Color LED Fork Turn Signal Blinkers are designed for motorcycle enthusiasts seeking enhanced visibility and style. Featuring 36 super bright LEDs, a waterproof build, and a universal fit for various motorcycle brands, these lights ensure safety and aesthetics on every ride.
Brand | CoCsmart |
Color | White/Amber |
Specific Uses For Product | Number Plates |
Vehicle Service Type | Motorcycle, Car |
Special Feature | Waterproof |
Wattage | 30 watts |
Auto Part Position | Front |
Lens Color | red |
Item dimensions L x W x H | 5 x 0.6 x 0.3 inches |
UPC | 738295444604 |
Assembly Required | Yes |
Manufacturer | CoCsmart |
Item Weight | 1 pounds |
Product Dimensions | 5 x 0.6 x 0.3 inches |
Manufacturer Part Number | CoCsmart-004 |
Special Features | Waterproof |
B**N
Excellent brightness
Great bang for the buck, just have to do a little wiring to connect
K**.
Works as intended
I actually replaced an older and more worn pair from a different brand with these and they work great. They are a hair smaller than my previous ones, but they are plenty bright and work great! The adhesive sticks and I secured them with zip ties. I've only used them in nice sunny weather so they haven't really been exposed to the elements quite yet, if anything changes I'll update!
J**R
Works as advertised! Looks great! Adhesion is weak and the zip tie ought to be larger.
I installed these not on the forks, but on my air filter covers of my 2005 Kawasaki Vulcan 750. I wanted a nice strip of forward visibility to oncoming cars. In the daylight, they aren't quite as noticeable as I was hoping for. But every little bit helps. At night, it's quite a different story! It adds a lot of visibility on the ground right by the front wheel that really adds a presence to my bike! The view from the front is downright menacing!To get these to fit around the airbox, I had to extend the zip-ties by connecting several in line with the built in one. I wish the built in one was bigger so I could use longer zip ties. I had to use 7 short ones to fit. The built in ones are long enough to use on the fork, but they seem to be a bit thin. The adhesive isn't very strong and I would not trust it to hold much. The zip tie is doing most of the work. The adhesive did not hold it in the curve shape against the airbox, so it definitely wouldn't hold against the tighter curve of the forks.The wires are kind of small making it a bit of a pain to work with, but not impossible.Lastly, these are designed for a normal flasher rate (75-95 flashes per minute). If your flasher is faster than this, they will get out of sync when flashing. I'm certain this is to make them compatible with bikes that have an always on signal to their turn signals. I have LED signals in the back so my flash rate was super fast. I switched to an LED rated flasher (EP34) and it was slower but still too fast and faster than stock with stock bulbs. I'm going to go back to the stock flasher and add a load resistor to get the proper rate.I've only had them 1 week, so I can't speak to longitivity.
M**W
2 years still working
Easy to install, 2 years strong, nice and bright, 2 colors, slick flasher mode. Be delicate, a bit dainty
J**A
They really work great and very bright
The media could not be loaded. Very nice. Fit and work beautifully. Very bright.
L**H
Thin Wires - Easily Fogged
I bought these in December of 2023 and as of now, 07 2024 they are completely useless. They're so full of moisture that they can't be seen more than a couple feet away and you hope no one's looking that closely cause it looks like trash.The wires are so thin that sometimes the running light portion will blink out randomly. I've checker all connection points and things are tight ao I can only assume that 1 of the 3 hair thin strand of wire is frayed somewhere inside the rubber. I will not try to take it apart because to do so would guarantee destroying the wires entirely. Don't waste your money.
A**D
If they work they're great nice and bright
Last set only one of the turn signals actually worked but the running lights were bright as ever so there's that. I thought I was wiring something up wrong for about an hour before I pulled everything apart and realized they didn't even wire in the turn signal to the circuit board. Hopefully one of these 2 work
S**S
LED Turn Signals
way brighter than I expected and it took minutes to install. We will see if they stand the test of
Trustpilot
1 month ago
1 month ago