Neoteck Digital Angle Finder LCD Digital Angle Gauge Waterproof Protractor Inclinometer Bevel Box for Helicopter Bevel Angle of Miter Saw Automobile Test and Repair and ect-Blue

Works great, good quality, good price, Fast delivery

The key selling point over other makes is it does degrees and percent rise.The photo shows that it is accurate enough, being out only 0.09 degrees which is a combo of the decides and the error in being off 90 in the square I used as a reference to measure.Simple to use from woodworking to set blade angles, running drain lines and gutters (rise/fall) and measuring the slope of your model railroad track in %.

There was a significant deviation in angle around half a degree when rotating the level on the same surface and area. Not good enough for my use but for applications that don’t need that extreme precision could work.

I picked this product because of the high number of reviews. I am pleased with the selection. It works well, it is very fast and gives angles, with vertical reference, regardles of the positioning of the product. It has a very tight tolerance to horizontal misalignment, so be aware that if the angle you want to measure is in an inclined surface so the face of the product is not very vertical with respect to "gravity" :) for those angles, I suggest you get yourself a protractor.The magnet is quite useful. I used it on the edge of a 1/16” thick steel ruler, upside-down, and it held in place measuring the angle it was set at.I have recommended this product to a few colleagues. It is a good investment for your work or DIY projects.

as advertised. Good repeatability.

I mostly love this device, but what I really don't like about it is the side with the magnet isn't flat. The extrusion they are using for the housing has bumps in the corners and the whole thing teeter's one way or the other unless the surface that you're putting it on is large enough to accommodate the entire width of the device. So for example if you're trying to stick this to a pinion on an automobile to get an angle reading it's not possible because you don't have enough surface to make it happen. So what I did is sand one side of the thing flat on my belt sander. Yes really. Now it works perfectly.

I didn't want to spend a lot of money because I won't use it every day but I am please with what I got for the price. Super easy to use and as accurate as I need it. The magnet makes it easy to set parts to be welded at the correct angle, set my table saw blade to the degree I want, or just verify that certain angles are consistent. I highly recommend for the occasional metal or wood worker.

Works well! 2 batteries should last longer than the brand with one. Definitely like multiple modes. Accuracy matches well with my laser level.

Prima waterpas maar niet heel accuraat.

The construction is solid and the battery compartment cover is held with screws that engage with threaded brass inserts in the unit - a good first impression of quality. Also the three screws are captive within the cover so unlikely to get lost. The unit is well packaged but it was a bit shocking to find the photo on the box was of an orange/red unit - luckily though the product was the blue version I had wanted. The included black textile cover is a good fit and also well made. An instruction manual is included. The device has worked well as described. It was bought to quickly find possible locations for two satellite antennas at a new site. Other future uses can be envisioned. I am satisfied with the product.

DESCRIZIONE:Neoteck Angle Finder Digitale/LCD Goniometro Inclinometro Impermeabile Digitale/Bevel Box Livello Misuratore Angolo Magnetico Auto Spegnimento - Colore BluCARATTERISTICHE :Il Misuratore di Angolo Digitale con La gamma di misurazione ± 180° (0-360°), Piccolo e Leggero, Rendendolo Conveniente da Portare e Utilizzare, è Progettato per Impostare o Misurare Angoli Relativi tra le Superfici, anche Funziona come un Vero Livello Digitale. Valori Possono Essere Chiaramente e Facilmente Letti sul display LCD .Ci sono Potenti Magneti Incorporati sulla Base che Assicura un Attaccamento a Qualsiasi Superficie di Ferro .Fornisce Misure Precise, la cui Precisione è ±0,2 Grado .Auto Spegnimento:È Alimentato da 2 x BatteriaAAA LR03, Che Non è Inclusa e Si può Spegnere Automaticamente Dopo 3 Minuti di Inutilizzo . Collocato sul piano, all'accensione legge l'inclinazione rispetto all'orizzontale.ALTERNATIVE E CONFRONTI:alternative ce ne sono a centinaia su Amazon. Personalmente mi sento di dare un’occhiata al “Neoteck Bevel Box” le caratteristiche sono molto similari e costa meno.PRO:accuratezza nella precisione di lettura; facile utilizzo ed intuitivo. Ottimo per la misurazione dell'inclinazione della lama del banco sega;CONTRO:nulla di evidente; per la durata il tempo diràCONCLUSIONI:Mi è stato molto utile anche per impostare l'inclinazione della lama di una sega da banco. La precisione della misura rientra pienamente nelle tolleranze Fa ottimamente il suo lavoro, niente che dire... se costasse un tantino di meno il tutto sarebbe perfetto. Comunque molto consigliato

Ok

Acheté initialement pour dégrossir les réglages d'installation machines numériques (pro) je termine ensuite avec un niveau au 4/100mm par mètre. Il suffit finalement très largement au réglage des machines basiques.Il est très pratique, magnétique, compact, et surtout rapide à lire. La précision annoncée est la bonne. (Proche de 1/10mm par mètre, répétabilité très correcte pour le prix) à connaître avant d'acheter:Pour régler un angle de lame par exemple, il est parfait, on calibre le zéro sur la table préalablement. (Réglage par comparaison)En revanche, en utilisation niveau pur (mise à niveau de la table de la scie par ex.) Il faudra tâtonner un peu avec un zéro pas encore calibré.Une fois la table machine réglée, s'en servir de référence pour chaque calibration.(Il faudra re-calibrer pour dépasser 90 degrés.)Dommage que la veille auto soit d'environ 1 min et non désactivable.Vraiment satisfait de mon achat