Draper Strap Wrench 280mm | 3/8" and 1/2" Sq. Dr Oil Filter Removal Tool | Adjustable Car Universal Hand Tool | 56137, Blue

It’s a very handy product … I had the chain type and it did not fit my car .. this it’s a top product well designed

Very good

This actually works quite well. However care is needed due to the size of the metal bar, as some oil filters are quite short, such as those on motorbikes. This means when enough of the strap is secured round the filter, the metal bar can end up rubbing against the engine casing and taking off any paint. I reduced the chance of this happening by wrapping the outside of the ends with electrical tape.What this strap type wrench does do however is prevent damage to the filter itself, this might not be important as the filter normally gets thrown away, but if you are just inspecting or planning to reuse the filter, this might be helpful.

Great addition to any tool box

use this nearly every day, hasn’t shown any signs of wear yet. good price and good tool

I used this to undo an oil filter and it did the job easily enough. I also used it to nip up the new oil filter the 3/4 turn from contact as my fingers weren't strong enough. My mistake, it dented the filter housing with very little effort. I had to scrap the filter. I don't recommend use for tightening, it's too blunt an instrument.

As you would expect from Draper, a really good quality feel to this product. Great to have the option of both 3/8 and 1/2" drive. Used this to remove an oil filter on my Volvo where the filter is set into a pocket with only about 25mm showing that you can get a grip onto, certainly not enough to undo by hand. Wrapped the strap around the filter passed it back thro the slot on the socket and used the 3/8" socket on it and the filter just undid without and real effort. This does have a really long strap that I thought would get in the way, but no it did the job very well.

Good price can use 3/8 or 1/2